Recessed luminaire

What is the danger

The product poses risk of: - electric shock because: - the basic-insulated parts (terminal block and single insulated wires) are accessible, - there is no device protecting against pulling and twisting force, - the wires may be pressed to sharp metal parts - fire because the PVC insulation may get into contact with the light source and thus overheats (measured value: 126°C). The product does not comply with the Low Voltage Directive and the relevant European standard EN 60598.

Measures taken

1. Withdrawal from the market and recall from consumers ordered by the authorities Compulsory measuresTaken by: Other

Product

Description

The metal-covered luminaire consists of a metal frame and a plate holding the lampholder. The E27 ceramic lampholder is fitted to the plate with two screws. Main components: lampholder ("F519 4/250 VEM CE" + mark of approval), terminal block ("TEILBAR 230 400V CE" + mark of approval), supply cable insulated with PVC (cross section: 2x0,75 mm2). Technical specifications: 230 V; 60 W R63 E27; Class I; F-mark, IP20.

Brand

BRILUX

Model / type

R-63S. Bar code: 5 905148 063007